1. Replace the rubber connector between the intake port and carb
  2. Fix rubber stopper for steering
  3. Replace many of the AN aircraft bolts and locker nuts, especially the ones with high loads on the mast
  4. Cut the rubber trailing edge of the forward mast for better fit
  5. Replace old back tires and rims with huge tundra tires so they roll over rough terrain more easily
  6. Fix mast head construction issue (the nut attaching the wing to the mast wears out the bronze bushings and
    the walls of the hollow mats)
  7. Make instrument pod and add VSI, slip indicator, chrono, tacho, hr. meter, elevation, baro, G-meter, voltage
    monitor ignition switch and two 12V 15 Amp power outlets with thermal fuse.
  8. Rebuild the carb and replace the choke cable with a choke lever
  9. Replace the jet needle, needle jet and main jet
  10. Add tie down lines to the wing
  11. Replace spark plugs
  12. Fix two of the loose batten ties
  13. Replace the cracked hour meter (with 105 hours flight time)
  14. Add GPS mount to trapeze
  15. Add 5th point to seat belt
  16. Re-route safety parachute lines to comply with manufacturer's guidance
  17. Patch the small hole on sail
  18. Re-position the safety parachute trigger
  19. Replace stopper on break cable
  20. Re-route ignition switch
  21. Add nice shiny aluminum propeller spinner (improves performance)
  22. Add water bottle holder
  23. Replace the intake silencer bracket
  24. Make and mount three custom sunbrella saddle bags with stainless fittings and marine zippers
  25. Add grading to fuel tank
  26. Fix fuel intake lines
  27. Fasten down fuel tank
  28. Add seizing wires
  29. Replace gearbox oil plug and washer
  30. Replace the fuel filters and all the fuel lines
  31. Replace the hand fuel pump
  32. Replace the pneumatic fuel pump
  33. Replace the pulse line
  34. Replace air equalization line
  35. Replace one of the exhaust mounting bracket
  36. General cleanup
  37. Fix slow leak in front tire
  38. Mount the tent and sleeping bag
  39. Replace the gear oil
  40. Replace all old wiring with tinned marine grade wires
  41. Replace the hand gas lever
  42. Make usb charger for phone
  43. Add new stainless prop foils
  44. Re-torque all bolts and nuts to Rotax specifications
  45. Add camera system
  46. Add edge to ramp for carrying the trike
  47. Add aviation Radio
Preparations of the Plane
(green - completed):